1/16 Hyper Go 4WD Off-road Brushless 2S RC Truggy MJX-16210

Hyper Go

(No reviews yet) Write a Review
Adding to cart… The item has been added

Product Overview

MJX 1/16 Hyper Go 4WD Off-road Brushless 2S RC Truggy

Push the throttle hard off-road and still never lose control - the Hyper Go 1:16 scale truggy accelerates up to 45km/h with its 2845 brushless racing motor and ensures precise handling with regulation options. These include two adjustable top speed settings, a fast steering servo for agile direction changes, adjustable aluminium oil-pressure shock absorbers, adjustable suspension and an adjustable wheelie bar. Metal CVD drive shafts, metal propshaft and 45A brushless controller incl. active fan round off the equipment. The entire electronics are protected against splash water and allow unrestricted outdoor use. The large high-grip tyres made of soft rubber ensure full grip on any surface. In addition, the model is equipped with a bright switchable LED light for great action even in the dark. The handy 3-channel remote control transmits all functions without interference and also allows the operation of several models in parallel thanks to the 2.4GHz system. The model is available as an RTR package (Ready-to-Run), i.e. all components - except for household batteries for the remote control - are already included.

Adjustable chassis: For more directional stability on the front axle
Metal cardan shaft: For wear-free drive to the metal differentials
Metal CVD drive shafts: For direct drive to the wheels
2S LiPo power with 7.4V, 25C and 1050mAh in a hardcase battery specially developed for the series
Professional brushless racing motor for high speeds of up to approx. 45km/h
Fast steering servo for agile directional changes on any surface
Robust body with internal body frame for high strength
Composite chassis for good durability
Partial aluminium shock absorbers
Metal propshaft
Full ball bearings
High ground clearance (approx. 31mm)
Bonnet with body clips and rubber tabs for safe removal
Bright switchable LED lighting fitted
Adjustable wheelie bar included
Adjustable top speed on transmitter in two steps

Scale: 1:16
Length: 310mm
Width: 220mm
Height: 120mm
Weight: 1055g incl. battery
Wheelbase: 175mm
Track width front: 190mm
Track width rear: 185mm
Ground clearance: approx. 31mm
Front wheels: Outer diameter/width 80/45mm
Rear wheels: outside diameter/width 80/45mm
Rim diameter: 50mm
Gearbox: Metal
Front shocks: 60mm
Rear damper: 60mm
Brake: Electronic
ESC: Brushless 45A
Motor: 2845 Brushless
Drive system: Cardan metal
Steering servo: Mini
Main material: Composite plastic
Battery compartment dimensions: 110x35x24mm
Battery: LiPo 2S 7.4V 1050mAh, 25C, Hardcase, Deans connector / T-Plug, 78x34x29mm, 74g
Drive time: up to 12min
Top speed: up to 45km/h
Remote control: 3-channel, 2.4GHz
Range: approx. 100m
Charger: USB-Balancer charger with 7.4V 1.5A output power
Charging time: approx. 60min

Remote control
Battery (Item no. MJXS-B105A)
USB charging cable
Screw set
Instruction manual

Requirements (not included):
Batteries for transmitter


(No reviews yet) Write a Review